Arena Luci LC9182SZG-RGB, Руководство пользователя

Страница: 6 / 8

6/8
LC9182SZG-RGB
9. Find and Bind a Zigbee Lighting Device
10. Find and Unbind a Zigbee Lighting Device
11. Clear All Find and Bind Mode Paired Lighting Devices of a Group
S1 S2 S3
W
W+
ZigBee Lighting Device
Step 1 : Start find and bind mode on the
Zigbee lighting device (initiator node)
and enable it to find and bind target,
refer to its manual
.
LED indicator
Step 2 : Short press a group button that
you would like to bind the device to .
Step 3 :Press and hold down until LED
indicator turns on .
Step 4 :Short press to enable the remote
(target node) to find and bind initiator.
LED indicator flashes 4 times for
successful binding or twice if binding fails.
Note: Each remote can bind max. 30
lighting devices.
S1 S2 S3
W
W+
ZigBee Lighting Device
Step 1 : Start find and bind mode on the
ZigBee lighting device (initiator node)
and enable it to find and unbind target,
refer to its manual
.
LED indicator
Step 2 : Short press the group button
that the device already bound to
.
Step 3 :Press and hold down until LED
indicator turns on .
Step 4 :Short press twice to enable the
remote (target node) to find and unbind
initiator. LED indicator flashes 4 times
for successful unbinding or twice if
unbinding fails.
S1 S2 S3
W
W+
Step 1 : Short press t
o
choose the group
that you would like to unbind all devices
.
LED indicator
Step 2 :Press and hold down until LED
indicator turns on .
Step 3 :Short press 5 times continuously
to clear all bound lighting devices with this
group. LED indicator flashes 4 times for
successful unbinding.
Note: Make sure the device and remote already added to the same zigbee network.