Arecont Vision MegaDome
®
Installation Manual
5 | P a g e
MegaDome
®
Pendant Mount (MD-CMT) Installation Instructions
Inside the box:
A. Top shield
B. Pendant Mount
C. Mounting template
D. Pack of four (4) machine screws
E. Pack of four (4) small machine screws
F. Pack of four (4) wood screws and four (4)
dry wall anchors
G. Large round rubber gasket
H. Smaller square rubber gasket
I.
One double sided hex key
Not included but needed:
J.
#2 Phillips head screw driver
Image 10
20. Remove Pendant Mount and hardware from
the box.
Image 11 Image 12
21. Using the Mounting template, prepare the
mounting provisions for camera installation.
22. Place small gasket onto pendant dome as
shown in
image 11
.
23. Attach Dome to Pendant as shown in
Image
12
using four machine screws provided.
24. Install large round rubber gasket onto
Pendant as shown in
image 12
. Be sure to
align the holes appropriately.
25. Run Ethernet Cable and outside power cable
(if necessary) through the Pendant.
26. Attach Pendant to the ceiling using the four
wood screws provided or any optional
hardware suitable for the mounting surface.
27. For installation of the camera, please
reference “
Mounting the Camera
”.
E
C
H
G
D
B
A
I
F
