7
Quick Installation Guide
Note:
The ARC-1200 SATA RAID controller requires a PCIe x1 slot (can
operate in x2, x4, x8 and x16 slot). For more information about
PCIe slot, please refer to your mainboard guide.
Figure 1-2, Insert ARC-1200 SATA RAID controller into a PCIe slot
2.2 Installation
Step 1. Prepare the computer
Turn off the computer and unplug the power cord(s) from the back of
the power supply. Remove the cover from the computer.
Step 2. Install the ARC-1200 SATA RAID Controller
To install the ARC-1200 SATA RAID controller, remove the mounting
screw and existing bracket from the rear panel behind the selected PCIe
slot. Insert the controller in a PCIe slot on a mainbord. Press gently but
firmly down to ensure that controller is properly seated in the slot, as
shown in Figure 1-2. Then screw the bracket into the computer chassis.
