Areca ARC-1110, Руководство пользователя

Страница: 148 / 171

APPENDIX
148
boot up the system from this bootable DOS floppy diskette.
New releases Flash ROM image is available in the form of a DOS
file. The file available for each model contains the following format
in each version:
ARCXXXROM.BIN: → Flash ROM Image Binary Code (where “XXXX”
refers to the model name)
Normally, Areca strongly recommends customer uses the McRAID
manager to upgrade the firmware. ARCXXXROM.BIN doesn't
include in the shipped CD and Areca’s web site. It is for customer’s
emergency recover purpose only.
• Hardware Setup
To ensure proper communications between the RAID adapter
and the DOS arcflash utility program, Short the Mode 0 Flash
jumper cap in the manufacture port to enter the upgrading entire
flash ROM function. Please be sure of removing the cap after you
completed the flash ROM image. This way let the Adapter work in
the normal mode.
• Mode 0 Flash Jumper function:
Short: Causes cpu core to be held in rest (mode 0). Arcflash utility
can upgrade the entire Flash ROM image.
Open: This is the normal default board operation.