KL-3WT Quick Installation Guide
7
The system automatically scans and lists the network
cameras connected to the Media Station once entering the
[
Network device manager
] page. You may click Refresh
button to scan again. Click Login button and the login
authentication dialog pop out. Enter the username and
password of the camera to complete the authentication and
change the status to [
OK
]. Then the camera is ready for
video input selection. Select the desired camera by its IP
address. For signal type of encoder, enter RTSP or RTP
connection URL.
Setup
Step 1: Set up video input name, signal type,video source, PTZ control in [
Video inputs
] of
[
Media I/O
]. The Capture source can be the video port [ ] and [ ] with option VGA
or HDMI. If only one of the latter is connected, the system would detect and automatically
switch to source of signal. If both options are connected, set the capture priority between
those.
If the desired video source is network camera, a login authentication with the camera is
required firstly in the [
Network device manager
] setup tab of [
Media I/O
].
