KL-3W User Manual
10
www.arec.com
1.1.1 Video inputs
The KL-3W is capable to process up to three video inputs. The name of these inputs are user configurable; by default are
Content, Cam 1 and Cam 2.
1.1.1.1 Content / Cam 1 / Cam 2
Signal type
can be choose from
Network Camera, Encoder
or
Video port
. The last option is available only for the first two
video inputs.
PTZ control
: The KL-3W is highly integrated with PTZ cameras and provides two control methods, Over IP or via Serial
port.
Video port
Select Video source: The KL-3W provides VGA and HDMI input options for video port. If only one of
those is connected, the system would detect and automatically switch to source of signal. If both
options are connected, select one in between.
Network Camera
Select IP address: Select from the camera ip address drop list of those available.
Note: A login authentication with the camera might be required. See Media I/O\ Camera manager for
more details.
Encoder
Select Protocol: The available options are UDP, RTP, RTSP, or RTMP. Enter the primary and secondary
url/port number.
Serial port
Select this option when the appointed camera uses RS-232 PTZ control protocol. Then complete the
Serial port selection from drop list Port 1~4. See Media I/O\ PTZ control port for more details.
Over IP
The option is available when the specified signal type is a network camera. Select this option if that
camera supports networking PTZ control.
