Arec CI-T25H, Руководство пользователя, Страница: 30 / 68

CI-T25H User Manual
30
Chapter 2. Remote Controller
2.1 Keys Instruction
Finishing initialization, it can receive and execute the IR commands. Press the remote controller button, the indicator light
is flashing; release the button, the indicator light stops flashing. Users can control the pan/tilt/zoom, setting and running
preset positions via the IR remote controller.
In this instruction, “press the key” means a click rather than a long-press, and a special note will be given if a long-press
for more than one second is required.
No. Name (press the key) Brief instruction
1 Standby Key
After 3S long press, the camera will step into standby mode. Long press 3S again,
the camera will self-test again and back to HOME position. (Note: If power-on
mode is turned on and Preset 0 is set, and there is no operation within 12s, it will
automatically point to the specified preset position.
2 Camera Address Selection Select the camera address which wants to be controlled
3 Number Key Set or run 0-9 presets
4 *,# Key Key combination use
5 Focus Control Key
Auto Focus: Enter into auto focus mode.
Manual Focus: The camera focus mode is manual
Switch the camera focus mode to manual focus by pressing [focus +] or [focus -] to
adjust.
Press and hold the key, the action of focus will keep continue and stops as soon as
the key is released.
6 Zoom Control Key
Zoom+:Lens near
Zoom-:Lens far
Press and hold the key, the camera will keep zooming in or zooming out and stops as
soon as the key is released.
7 Set or Clear Preset key
Set Preset: Set preset key + 0-9 number key:
Clear Preset key: Clear preset key + 0-9 number key
8 Pan/Tilt Control Key
Press Key :Up
Press Key :Down
Press Key :Left
Press Key: Right
“HOME” Key: Return to the middle position or enter into the next level menu
Press and hold the up/down/left/right key, the pan/tilt will keep running, from slow
to fast, until it runs to the endpoint; the pan/tilt running stops as soon as the key is
released.
9 BLC Control Key BLC ON / OFF: Turn on or off the back light
10 Menu Setting
Open or close the OSD menu
Enter / exit the OSD menu or return to the previous menu.