CI-22H Quick Installation Guide
07
(1) Power on: Connect DC12V power supply adapter with power supply socket.
(2) Initial configuration: Power on with power indicator light on and remote control receiver light blinking,
camera head moves from bottom left to the bottom, and then goes to the HOME position (intermediate
position of both horizontal and vertical), while the camera module stretches. When remote control
receiver light stops blinking, the self-checking is finished.
NOTE:
1. The default address of the remote controller is the 1# address.
2. If you set preset 0, when Power on self-test is completed, the camera automatically moves to the
preset
0 position.
(1) Video Output from LAN
a. Network Cable Connection Port: Connect this product and your computer through network cable, the
device LAN interface refer to item E in Figure 1.1.
b. Webpage Login: Open your browser and enter 192.168.11.202 in the address bar (factory default);
press Enter to enter into the login page; click on the “player is not installed, please download and
install!" and follow the installation steps for installation. Then enter the user name admin and
password admin (factory default); press Enter to enter into the preview page, users can carry out
PTZ control, video recording, playback, configuration and other operations.
(NOTE
:
If you forget your user name, password, IP address, you can manually restore the default by
the remote controller key combination * #)
(2) HDMI Video Output
a. HDMI Video Cable Connection: CI-22H refer to item D in Figure 1.1
b. Connect the camera and the monitor via HDMI video cable; video output is available after camera
self-test.
(3) USB3.0 video output
a. USB3.0 video cable connection: CI-22H refer to item C in Figure 1.1
b. Connect the camera and the monitor via USB3.0 video cable, open video player software, select
video device, and then video output will be available.
(4) USB3.0 compatible USB2.0 video output
a. USB3.0 video cable connection: CI-22H refer to item C in Figure 1.1
b. Connect the camera and the monitor via USB3.0 video cable, open video player software, select
video device, and then video output will be available.
(5) USB2.0 video output
a. USB2.0 video cable connection: CI-22H refer to item B in Figure 1.1
b. Connect the camera and the monitor via USB2.0 video cable, open video player software, select
video device, and then video output will be available.
1.1 Power on initial configuration
1.2 Video output
