The default network setting of the camera is DHCP, which means IP is assigned by a router or
any DHCP server. To log in to the administration web, please connect the camera and your PC
/Notebook or a DHCP server. Follow below steps to access the camera for the first time.
• Run the “Device Search Tool” utility, and click button.
• The tool should find the network camera and show detailed information. Double click on
the founded CI-430.
• An access window will pop-up and ask for user name and password.
• Enter the default user name and password admin/ admin in the dialogue. Note that user
name is case sensitive.
Camera Login
The main page of the network camera user interface is shown as the figure below. Please
note that function buttons will vary depending on the camera model.
Browser-based Viewer
Install the ActiveX Control
• After connecting to the camera, the request for installing the ActiveX control will appear just
below the URL bar.
• Right click on the information bar, and then click on <Install ActiveX Control…> to permit
ActiveX control installation.
• In the pop-up security warning window, click on <Install> to start downloading DCViewer
software on the PC.
• Click on <Finish> after DCViewer installation is completed.
CI-430
Network Camera
Quick Guide
Ver. 1.0
3
BC:BA:E1