ARECast Quick Installation Guide
3
3. Press [ Pair ] button to get into paring mode.
4. Connect the USB cable of ARECast to your
computer for pairing.
5. After waiting for 3-5 seconds, the “Pair Status”
will show “finished”.
7. The device is ready. Press on the button to
project!
6. Disconnect the USB cable first, then
connect both the USB and HDMI cables to
your computer. ARECast’s LED button will
first start flashing red (pairing) and then
change to steady blue (ready for projection).
Steady BLUE
Click to share!
Dongle Configurator
After pressing [ Pair ], please plug the USB
cable of the transmitter to the laptop.
AREC
IP :
SSID :
Password :
192.168.0.1
Pair
Pair status :
finished
Version:202109061138
FW Version:
Dongle Configurator
After pressing [ Pair ], please plug the USB
cable of the transmitter to the laptop.
AREC
IP :
SSID :
Password :
192.168.0.1
Pair
Pair status : pairing .......
Version:202109061138
FW Version:
