User
’
s manual
–
A
REBO
S Radiant Heater 2000W
5
•
The marketing concerning covering shall be visible after the heater has been installed.
•
Save these instructions.
2. Installation
•
Use four (M6 * 30) screws to fix the chassis to the bottom of the heater (as shown).
3. Technical Specifications
Model
AR-HE-THS2000; AR-HE-THS2000B
Rated Voltage
AC 220-240V (50/60 Hz)
Power Consumption
2000W
Dimensions (W x D x H)
300 x 300 x 1005 mm
Protection class
I
Degree of protection
IP 34
Weight
4.3 kg
Remote control battery
CR 2032 / 3V
4. Operating Instructions
•
These appliances must be supplied with proper voltage and frequency (AC120V, 60Hz), and
connected to an individual, properly grounded branch circuit, protected by a circuit breaker
which in accordance with wiring ruls. power cord of this appliance must be fastened with the
chain, installation can only be carried out by qualified person in order to avoid a hazard.
•
Only operate the heater when it is in the upright position. Our Electric Patio Heater is
equipped with One heat setting. The switch on the heater head is used to control the One
heat setting for1500W, The 0 position is off. To operate the heater on high, push the Switch
Cord again. This will cause both the bottom and top heating elements to glow and radiate
heat.
ON/OFF rocker switch
