User’s Manual –
A
REBO
S Solar Heating
6
1.5
–
1.25 inch
Connection
Figure 2:
1.
Take off the protection cap.
2.
Put the O-ring into the male ending (wipe the silicon lubricant).
3.
Insert the mal end into the female end (match the slot).
4.
Turn the main pipe and fix it.
Figure 3: baffled connection
Use this as shown in the picture below. Connection principle equals to figure 1.
Figure 3: Baffled connection
Figure 4:
1.
Put the O-ring into the male ending (wipe the silicon lubricant).
2.
Insert the mal end into the female end (macht the slot).
3.2 Double Set
If your systems use the pump 0.5HP or less than 0.5HP please refer the following connection way.
For the numbers in the following system picture please refer to 3.1. Make sure you assemble the
baffles in the right spot for a well working circulation system.
1.
Connection without baffle.
2.
Connection elbow from the solar heater towards the pool
3.
Connection with baffle.
4.
Connection elbow from your pool pump towards the solar heater.
