U
ser’
s Manual
–
A
REBO
S Multitool 300W
11
Function principle:
The tool oscillates up to 22,000 times per minute around the drive axis due to the oscillating drive.
This helps the tool to penetrate the material without requiring any great force and allows it to cut
cleanly evening constricted areas.
Cutting:
Only cut soft tiles and stone materials. Do not cut hard materials such as ceramics and granite. Not
for nails, screws, non-ferrous metals and tiles.
Grinding/Sanding:
Only use perfect grinding/sanding sheets. Ensure that you apply even pressure and rotate the
machine around the working area.
Excessive working pressure will result in heavy wear on the machine and grinding/sanding sheets and
not to better results.
Grinding/Sanding sheets which have been used on metal must not be used on wood afterwards.
4. Technical Data
Feature
Data
Mains voltage
230-240V AC
Idling speed
15.000
–
22.000 rpm
Protection Class
II
Sound Pressure Level
89.2 dB(A)
Sound Power Level
100.2 dB(A)
Uncertainty K
3 dB(A)
Vibrations
a(h)= 4.464m/s
2
Uncertainty K
1.5 m/s
2
5. Service and Maintenance
Pull the plug before carrying out any work on the machine.
Use a damp cloth to clean the plastic parts.
Do not use any cleaning products, solvents or sharp objects.
Clear the ventilation openings and moving parts from dust with a soft brush or paintbrush at regular
intervals.
Only use accessories and spare parts recommended by the manufacturer. If the equipment should
fail some day in spite of our quality controls and your maintenance, only have it repaired by an
authorized electrician.
