background image

Original User Manual 

 A

REBO

S Petrol Brush Cutter String Trimmer 52cc 

 

 
 

1.2 Safety rules   

 

Read the instruction manual carefully before using the unit. This applies in particular to the 

safety instructions. Otherwise you may injure yourself or damage the device.  

 

Keep the instructions for use for future reference. If you pass the device on to third parties 

for use, be sure to also hand over these instructions for use. 

 

Only use the device as described in this manual. Any other use is considered improper and 

may result in property damage or even personal injury. 

 

This device may not be used by persons who are not familiar with the operating instructions, 

children under the age of 16 or persons who are under the influence of alcohol, drugs or 
medication, tired or ill.  

 

All persons with limited physical, mental or sensory abilities may only use the machine under 

supervision.   

 

The warranty for this device expires with:  

-

 

improper handling 

-

 

Non-observance of the operating instructions  

-

 

Repairs by third parties, unauthorized specialists 

-

 

Installation and replacement of non-original spare parts 

-

 

improper use 

-

 

Failure of the electrical system to comply with electrical regulations and VDE regulations 

 

Only persons who have been instructed in the use of the tool and are therefore aware of the 

dangers involved may work on the tool.  

 

Clean the machine completely, especially the fuel tank and the air filter. After using the 

machine, all fuels must be removed.  

 

Never touch the drill while the machine is running. If it is necessary to replace the protection 

or the drilling tool, be sure that the machine and the drilling tool have come to a standstill. 

 

The machine must be switched off before changing the working area of the machine. 

 

If the machine is defective, do not allow it to continue running.  

 

When starting or operating the machine, never touch hot parts such as the exhaust, the 

ignition cables or the spark plug.  

 

After the machine is stopped, the exhaust is still hot.  

 

Never place the machine near flammable materials (dry grass, flammable gases or flammable 

liquids, etc.). 

 

Pay particular attention to the fact that the ground may be slippery when operating in the 

rain or immediately after the rain. 

 

If you fall to the ground, release the throttle immediately. 

 

Take care not to drop the machine or hit it against obstacles. 

 

Before adjusting or repairing the machine, be sure that the machine is stopped and the spark 

plug connector is disconnected. 

 

If the machine is to be stored for an extended period of time, drain fuel from the fuel tank 

and carburetor, clean the parts, place the machine in a safe place and ensure that the 
machine has cooled down completely.  

 

Perform continuous checks to ensure safe and efficient operation of the machine. For a 

complete check, please contact a specialist workshop. 

 

Keep the machine away from fire or sparks.  

 

Be careful when using the machine. There is a risk of kickback and recoil. 

 

 
 
 
 

Содержание 4260627421077




















Отзывы: