Arduino® MKR IoT Carrier
Rev2
2 / 18
Arduino® MKR IoT Carrier Rev2
Modified: 12/01/2023
Features
Note: This board is passive and requires a MKR board to function.
Requirements: This device require the library Arduino_MKRIoTCarrier version to be 2.0.0 or later in order to function
Grove Connectors
Easy interface with wide range of Grove modules and sensors
2x analog sensor input
1x I2C interface
ST LSM6DSOXTR 6-axis IMU
3D Gyroscope
±2/±4/±8/±16 g full scale
3D Accelerometer
±125/±250/±500/±1000/±2000 dps full scale
Advanced pedometer, step detector and step counter
Significant Motion Detection, Tilt detection
Standard interrupts: free-fall, wake-up, 6D/4D orientation, click and double-click
Programmable finite state machine: accelerometer, gyroscope and external sensors
Machine Learning Core
Embedded temperature sensor
Rounded 1.3” TFT Display
240 x 240 resolution
36 x 40 mm
Bosch BME688 Environmental sensing with Artificial Intelligence
Operating range
Pressure: 300-1100 hPa
Humidity: 0-100%
Temperature: -40 - +85°C
eNose Gas sensor
Sensor-to-sensor deviation (IAQ): ± 15% ± 15 IAQ
Standard scan speed: 10.8 s/scan
Electric charge for standard scan: 0.18 mAh (5 scans - 1 min)
Major Sensor outputs
Index for air quality (IAQ)
bVOC- & CO2-equivalents (ppm)
Gas scan result (%)
Intensity level
Broadcom APDS-9660 RGB and Gesture Sensor
