Arduino® Nano RP2040 Connect
Arduino® Nano RP2040 Connect / Rev. 01 - 14/05/2021
18
/
19
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled
environment.
3. This equipment should be installed and operated with minimum distance 20cm between the
radiator & your body.
English: User manuals for licence-exempt radio apparatus shall contain the following or equivalent
notice in a conspicuous location in the user manual or alternatively on the device or both. This device
complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions:
(1) this device may not cause interference
(2) this device must accept any interference, including interference that may cause undesired operation
of the device.
French: Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) l’ appareil nedoit pas produire de brouillage
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
IC SAR Warning:
English This equipment should be installed and operated with minimum distance 20 cm between the
radiator and your body.
French: Lors de l’ installation et de l’ exploitation de ce dispositif, la distance entre le radiateur et le
corps est d ’au moins 20 cm.
Important:
The operating temperature of the EUT can’t exceed 85
℃
and shouldn’t be lower than
-40
℃
.
Hereby, Arduino S.r.l. declares that this product is in compliance with essential requirements and other
relevant provisions of Directive 201453/EU. This product is allowed to be used in all EU member states.
Frequency bands
Maximum output power (ERP)
2400-2483.5 Mhz
17 dBm
