ArduCAM ArduCAM-M-5MP, Руководство пользователя

Страница: 4 / 8

ArduCAM-M-5MP Camera User Guide
www.ArduCAM.com
3
3 Features

5MP image sensor OV5642

M12 mount or CS mount lens holder with changeable lens options

IR sensitive with proper lens combination

I2C interface for the sensor configuration

SPI interface for camera commands and data stream

All IO ports are 5V/3.3V tolerant

Support JPEG compression mode, single and multiple shoot mode, one time capture multiple
read operation, burst read operation, low power mode and etc.

Well mated with standard Arduino boards

Provide open source code library for Arduino, STM32, Chipkit, Raspberry Pi, BeagleBone
Black

Small form of factor
4 Key Specifications

Power supply
Normal :5V/390mA
Low power mode: 5V/20mA

Active array size: 2592x1944

Shutter: rolling shutter

Lens: 1/4 inch

SPI speed: Max 8MHz

Resolution support:

Frame buffer: 512KB 5MP, 1080p, 720p, VGA, QVGA

Size: 34 x 24 mm

Format support: RAW, YUV, RGB, JPEG

Weight: 20g

Pixel Size: 1.4µm x 1.4µm

Temperature: -10
℃～+
55
℃
Note
：
OV5642 sensor consumes too much current when working in full power, onboard LDOs can
be very hot due to the high voltage drop. Recommend to enter low power mode after capture, or
use lower input power voltage.
5 Pin Definition
Table 1 ArduCAM-M-5MP Pin Definition
Pin No. PIN NAME TYPE DESCRIPTION
1 CS Input SPI slave chip select input
2 MOSI Input SPI master output slave input
3 MISO Output SPI master input slave output
4 SCLK Input SPI serial clock
5 GND Ground Power ground
6 +5V POWER 3.3V~5V Power supply
7 SDA Bi-directional Two-Wire Serial Interface Data I/O
8 SCL Input Two-Wire Serial Interface Clock