SM1794
▼
PROGRAMMER KNOB “STOP”:
The stop function resets the washing machine. If, for any reason, you want to
change the wash programme or add more washing to the load during the wash
cycle, simply place the programmer knob in position “STOP”, then re-position the
knob on the new programme and press the “START” button.
▼
EXTRA RINSE:
The washing machine has been designed to reduce water consumption to a minimum. In
very soft water areas, or in the case where detergent residues are noticed at the end of
the wash cycle, pressing this button will add one more rinse to the programme.
GB
USING THE WASHING MACHINE
OPTIONAL FUNCTIONS
▼
PREWASH:
Press this button to run a short wash at a maximum temperature of 40
°
C of approximate
duration 10 minutes. This function can only be used with the “COTTON” and “SYNTHETIC”
programmes and DAILY"
▼
ENERGETIC WASH
Press the button and the machine will carry out a wash cycle at the set temperature but
lasting longer.
The button is active with "COTTON" and "SYNTHETICS" programs.
▼
ANTI-CREASE:
When this button is pressed, at the end of the wash cycle, the items loaded in the washing
machine will continue to rotate for a further thirty minutes to reduce creasing. With this
function, the working spin speed is 800 rpm.
▼
DELAYED START:
The machine is fitted with a delayed start function. This allows the washing machine to be
programmed to start the wash cycle up to 8 hours later. The delay in hours can be selected
as follows: press the button to set a delay of 1, 2, 4, 8 hours. Press START (L). the button
(I) will light-up or a red arrow will appear on the display (according to the model) signalling
that the function has been activated. The machine will wait for the number of hours set to
elapse and then start the wash cycle automatically.
▼
START BUTTON:
Press this button to start the wash cycle. Button (L) will light up to indicate that the wash
cycle has started.
6
NB. The use of this function depends on the type of programme selected. Consequently, if the
wash programme does not include this function, the button cannot be enabled (see “PROGRAMME
TABLE”).
I
L
R
40
°
35
°
30
°
STOP
90
°
75
°
60
°
40
°
30
°
60
°
40
°
30
°
40
°
30
°
40
°
30
°
STOP
Warning!! only use this function if strictly necessary and then only if the programme to reset has been
running for a few minutes. Before opening the door after a reset, wait 2 minutes for the locking mechanism
to release.