background image

Check for parts online at 

www.getearthquake.com

 or call 800-345-6007 M-F 8-5

4

Operator's Manual

Trimmer Mower 600050 Series

GENERAL SAFETY RULES

•   Read, understand, and follow all instructions on the machine 

and in the manual(s). Be thoroughly familiar with the controls 

and the proper use of the trimmer before starting. 

• 

Familiarize  yourself  with  all  of  the  safety  and  operating 

decals on this equipment and on any of its attachments or 

accessories. 

• 

Do not put hands or feet near or under rotating parts.

•   Only allow responsible individuals, who are familiar with the 

instructions, to operate the trimmer. 

•   Thoroughly inspect the area where the machine is to be 

used and remove all foreign objects. Your equipment can 

propel small objects at high speed causing personal injury 

or property damage. Stay away from breakable objects, such 

as house windows, automobile, greenhouses, etc. 

•   Keep the area of operation clear of all persons, particularly 

small children, and pets. 

•   Wear appropriate clothing such as a long-sleeved shirt or 

jacket. Also wear long trousers or slacks. Do not wear shorts. 

•   Do not wear loose clothing or jewelry. They can get caught 

in moving parts.

•   Always wear safety goggles or safety glasses with side shields 

when operating trimmer to protect your eyes from foreign 

objects which can be thrown from the unit.

• 

Always wear work gloves and sturdy footwear. Wear footwear 

that will improve footing on slippery surfaces. Leather work 

shoes or short boots work well for most people. These will 

protect the operator’s ankles and shins from small sticks, 

splinters, and other debris.

• 

It is advisable to wear protective headgear to prevent the 

possibility of being struck by small flying particles, or being 

struck by low hanging branches, twigs, or other objects 

which may be unnoticed by the operator.

• 

Do not operate the trimmer without proper guards or other 

safety protective devices in place.

• 

Use this equipment for its intended purpose only.

• 

See manufacturer’s instructions for proper operation and 

installation of accessories. Only use accessories approved 

by the manufacturer.

• 

Operate only in daylight or good artificial light.

• 

Do  not  operate  product  when  fatigued  or  under  the 

influence of alcohol, drugs or other medication which 

can cause drowsiness or affect your ability to operate this 

machine safely. 

•   Never operate trimmer in wet grass. Always be sure of your 

footing; keep a firm hold on the handle and walk; never run.

• 

Before  each  use,  inspect  the  throttle  control  lever  and 

cable. Make sure that the cable is free and that the lever is 

not damaged. Also check the cable linkage running to the 

carburetor for kinks, loose fittings, and obstructions. Verify 

that the control bail is working properly.

•   Stop the rotating trimmer head when crossing gravel drives, 

walks, or roads. Wait for the cutting lines to stop rotating. 

• 

Watch for traffic when operating near, or when  crossing 

roads.

• 

Stop the engine (motor) whenever you leave the equipment, 

before cleaning, repairing or inspecting the unit, be sure 

the trimmer head and all moving parts have stopped. Let 

the engine cool, disconnect the spark plug wire and move 

it away from the spark plug.

• 

If the equipment should start to vibrate abnormally, stop the 

engine (motor), disconnect the spark plug wire and prevent 

it from touching the spark plug. Check immediately for cause. 

Vibration is generally a warning of trouble.

• 

After striking a foreign object, stop the engine (motor). 

Remove the wire from the spark plug. Inspect the trimmer 

for damage. If damaged, repair before starting and operating 

the trimmer.

• 

Never leave the trimmer unattended when the engine is 

running. Remove the wire from the spark plug.

• 

 Regularly inspect the trimmer. Make sure parts are not bent, 

damaged or loose. 

• 

Allow muffler and engine areas to cool before touching. 

Never pick up or carry the trimmer while the engine is 

running. 

•   Prolonged exposure to noise and vibration from gasoline 

engine powered equipment should be avoided. Take 

intermittent breaks and/or wear ear protection from engine 

noise as well as heavy work gloves to reduce vibration in the 

hands.

•   Check local regulations for age restrictions on use of this 

machine.

•   If  the  noise  or  vibrations  of  the  machine  increase,  stop 

immediately and perform an inspection.

• 

The  fuel  used  in  this  machine  is  considered  extremely 

flammable and should be handled with care. When  storing 

extra fuel be sure that it is in an appropriate container and 

away from any fire hazards.

Содержание EarthQuake 600050 Series





















































































Отзывы: