EN
15
9.
The fireguard of this heater is intended to prevent
direct access to the heating elements and must be in
its place while the heater is in use.
10.
Your device should not be used with another device
connected to the same power cable or fuse.
11.
The power cord should not be placed on the hot
body of the device or near to it. Do not make an
addition for the supply cable. Otherwise, it may cause
malfunction, electric shock or fire.
12.
If your device will not be used for a long time, will be
moved, cleaned or adjusted, unplug the device and
be sure that it is cool.
13.
Do not install the fan heater directly under the socket.
14.
Never expose the heating elements to water.
15.
The device must be unplugged during installation,
maintenance or repair.
16.
While unplugging the supply cable do not pull the
plug from the cable or touch it with wet hands and be
careful not to crush it under heavy objects.
17.
Turn off your heater using the function button and
unplug it.
18.
Keep your device in a dry and closed area.
19.
Perform the periodic maintenance and cleaning
of your device according to the instructions in this
manual.
20.
Do not use the heater while you are sleeping or do
not leave it unattended in working condition.
21.
Avoid using extension cord, it may cause fire due to
overheating. If you have to use an extension cable,
the cable section should not be less than 2mm
2
(14AWG).
22.
Use the device on a flat and even surface. The
device should only be used on its feet.
