ARDESTO AP-200-W1, Инструкция по эксплуатации, Страница: 57 / 70

Composition of the filter net
Clean air outlet
Pollution air inl
et
If the product picture is different from the actual product,
the actual product shall be prevail
Turn on the air purifier
After plugged in the power ,all the indicator
lights(except the air quality indicator light) will
be on ,then the indicator light of power will be
half on,the machine will enter standby mode.
Press ON/OFF button (as shown in above
figure),the air purifier will start to work,in the
beginning 30 seconds,the smart sensor
needs to preheat(the indicator light of air
quality will be in blue,the PM 2.5 value will be
shown as “———”),after 30 seconds’
preheating,the smart air quality sensor will
detect the air quality automatically .It will
show the air quality by different indicator
light colour (as shown in below figure).
indicator light color of air quality
blue
green
red
good
ordinary
poor
Reminder
Auto mode
A AU UTTO O
After plugged in the power,the air purifier
enters standby mode.Press ON/OFF button,
the machine will start to work and enter auto
mode.Under this mode,the air purifier will
choose wind speed automatically according
to the indoor air quality.
Manual adjustment of fan speed
A AU UTTO O
Speed
Press speed button,the wind speed will
change circularly in speed 1,speed 2,speed
3 ,auto mode.
Sleep mode
Sleep
When the machine is running ,press “sleep”
button,the indicator light of sleep button will
be on,the machine will enter sleep mode,the
other indicator lights will be off,after 10s later ,
the indicator light of sleep mode also will be
off .When in sleep mode,the fan speed and
noise level will change to the lowest,other
indicator lights will be off.Exist sleep mode
by press any button.
Child-lock function
C Chhiilldd lloocckk
（ （ P Prreessss 33ss ） ）
When running the machine (except sleep
mode),press the Child-lock button for 3s,with
beeps the indicator light of Child-lock will be
on. In this condition, the purifier won’t be
action when you press any key.Exist the
child-lock mode by pressing the button for
another 3 seconds.
Timer mode
Timer
Press the Timer button ,the working hour
can be choose in 1H,2H,4H,8H and no
timer.
Anion
(Reset)
Anion/Reset
When the indicator light of filter replacement
Press Anion button,anion function will work,and
the indicator light of ANION will be on .Press
ANION button again,the air purifier will be out of
anion function,and the indicator light of ANION
will be off.
is on ,it is to alert the user to replace the filter
net,after changing the filter net ,press the
“reset”button for 3 seconds ,the indicator light
of filter replacement will be off which means
the reset of filter replacement is successful.
Put the filter into the air purifier
To reinstall the back cover,please align
at the fixed groove and insert the back
cover into the groove.
Reminder