34
/
44
Use these keys
to adjust the temperature to
“230 °C”, then press the ENTER key
-
The oven will start working.
-
At the end of the program, the appliance will “BEEP” 10 times and the display
will show “End”.
-
The fan will stay on for about 3 minutes.
-
Switch of the appliance by pressing the ON/OFF key and let it cool down.
Note: If there is no operation within five minutes, the system will automatically
return to the standby interface
Second trial run
-
Ensure that the water tray (9) is in position.
-
Remove the tank (6) by pulling its handle.
-
Fill the tank, do not fill over the MAX level showed on the tank, close the top
and push the tank in its site.
-
Close the door (7);
-
Plug the oven into a standard 220-240V grounded outlet.
-
Set and run the DIY program as following:
1.
Press the ON/OFF key
; the display will lights on;
2.
Use these keys
to set the DIY program
, then press the ENTER
key
;
3.
Use these keys
to set the steam function
, then press the
ENTER key
;
4.
Set the time:
Use these keys
to adjust the hours of
working to “0”, then press the ENTER key
Use these keys
to adjust the minutes of
working to “30”, then press the ENTER key
5.
Set the temperature:
Use these keys
to adjust the temperature to
“110 °C”, then press the ENTER key
-
At the end of the program, the appliance will "BEEP" 10 times and the display
will show "End".
