ARDES AR5A107W, Инструкция по эксплуатации, Страница: 15 / 19

15
connect the electrical cables (fig. 9). NB: arrange the electrical
connection as shown in fig. 3.
- Remove the fan from the hook and fix the cap to the support plate
making sure the holes of the cap are coincident to the holes of the
support plate. Fix the cap by using the 4 screws previously unscrewed.
ATTENTION: make sure to tighten the screws very well and that the
groove of the plastic ball fit the jut of the cap (fig. 10).
- Fix the blade support to the blades by using the provided screws (fig.
11).
- Unscrew the screws from the bottom part of the motor and remove the
paper protection. Place the blades with blade support on the motor
making sure that the holes are coincident and fix them by using the
screws previously unscrewed (fig. 12).
- Install the light bulb (E27 type Max 60W not provided) in the lamp holder
- Install the decorative glass making sure that the three protuberances are
coincident with the three recesses of the decorative glass. Then secure it
by turning it.
ELECTRICAL CONNECTION:
FAN
BLUE
BLACK
WHITE
YELLOW/GREEN