13
Instructions for use
GB
1.
Plug the appliance into the mains socket.
2. Turn on the main switch located in the back of the product (“I” position).
The appliance emits a “beep”.
3.
Press the On/Off pushbutton:its indicator light will be on in the control
panel.
4. Press power level pushbutton to turn on the heat function: minimum
level (i) or maximum level (II). The selected power level is indicated by
its light on the control panel.
5.
To distribute the air flow over a wider surface, press the oscillation
pushbutton: it start to swing from right to left and viceversa. When
oscillation function is activated, its light will be on in the control panel.
To deactivate the oscilaltion function press oscillation pushbutton
again.
6.
When the unit is operating, you can set the timer to switch the appliance
off automatically after the set time. Press this button repeatedly to
select the desired time period in 1 hour increments from 1 hour to 10
hours. The related indicator light (1H, 2H, 3H, 4H) will illuminate on
the control panel. When all the indicators light are off means that timer
is not setted and the unit will continuously work until you switch off
manually the unit.
7.
When the unit is operating, press On/Off pushbutton to turn the unit off.
Functions can be activated by pressing the pushbutton on the control
panel or by using remote control. The remote control is provided with
battery: before use it remove the plastic tag from the battery tray. When
the battery is exhausted it must be replaced with another of the same
type (CR2025).
GB
Maintenance
This appliance does not require any special maintenance.
Disconnect the plug from the socket and let the appliance cool down well
before cleaning it.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents.
Do not use very wet substances, liquids or cloths to prevent water from
entering into the apparatus and irreparably damaging it.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
To clean the filter (picture on the side):
gently remove the back grill by pulling it outwards, remove the filter and
clean it using a soft slight damp cloth then replace in the appliance and
reseal the back grill.
