INSTALLATION AND OPERATING INSTRUCTIONS
THIS FIXTURE IS INTENDED FOR USE IN WET LOCATIONS AND IS IP66 RATED, BUT IT CAN
ALSO BE INSTALLED IN DAMP LOCATIONS.
DO NOT OPERATE IN AMBIENT TEMPERATURES EXCEEDING 120 F. HVAC EQUIPMENT MAY
BE REQUIRED TO MAINTAIN TEMPERATURES BELOW THIS VALUE.
THERE ARE NO RESTRICTIONS FOR SPACING BETWEEN LIGHTING FIXTURES OR BETWEEN A
LUMINAIRE AND PERMANENT ROOM STRUCTURE SURFACES. HOWEVER, THE FIXTURE
SHOULD NOT BE COVERED OR ENCLOSED IN ANY WAY.
THE CORD IS TO BE ROUTED SO THAT IT IS PROTECTED FROM DAMAGE AND IS NOT
SUBJECTED TO BEING UNDER STRESS. THE POWER CORD SHOULD ONLY BE USED FOR ONE
FIXTURE AND SHALL BE VISIBLE OVER ITS ENTIRE LENGTH.
DO NOT PLACE ANY PORTION OF THE CORD BEHIIND WALLS, ABOVE CEILINGS, OR
UNDERNEATH FLOORS.
DO NOT PERMANENTLY ATTACH CORD TO THE BUILDING STRUCTURE.
•
Design Modification Rights Reserved
7
6
2
2
7
9
X
X
D
ra
w
in
g
:
C
R
e
v
:
2
o
f 1
5
S
h
e
e
t:
D
E
F
E
n
g
:
0
9
/1
1
/1
7
INSTALLATION INSTRUCTIONS
Model: VT4806
D
a
te
D
ra
w
n
:
© 2018
!
When using electrical equipment, basic safety precautions should always be followed, including the following:
Read all instructions carefully before installing and save for future use.
•
Make sure all connections are in accordance with the National Electrical Code and local regulations.
•
To avoid possible electric shock, be sure the power supply is turned off before servicing or installing the fixture
•
Service should be performed by qualified personnel.
•
These instructions may not cover all details or variations. If additional information is needed, please contact 414.410.3600.
Model Series: Agriculture/Horticulture/Food Service
