MARK IMAGE SETUP
SELECT , PRESS ENTER
TOTAL FRAME 0
START TIME
/ / : :
EMD TIME
/ / : :
PLAY MARK IMAGE
DELETE MARK IMAGE
Play just marked
pictures or delete
marked pictures
Display of MARK IMAGE SETUP
4. Setup
(1)Start of SETUP
Press [MENU] button.
Log into the system by entering password.
Select SEPUP item using button
Press [ENTER] button to enter submenu of selected SETUP item.
Select SEPUP item in submenu using button, and change value using
button
Press [ENTER] button to select SEPUP item, and press [MENU] button to go back
to previous menu.
If you choose FACTORY DEFAULT, all settings shall be changed to settings done
by manufacturer, and we recommend you to set at FACTORY DEFAULT in the
first operation, or when you replaced EPROM for upgrading DVMR program or
replaced HDD.
You can set all group of settings at FACTORY DEFAULT as a whole or group by
group.If you want it as a whole, set ALL SET at ON by pressing [ENTER] button,
and set ALL SET at OFF and set each group of FACTORY DEFAULT at ON or
OFF independently by pressing [ENTER] button.After you decide ALL SET or
group by group set, move to RESET NOW and press [ENTER].
- 17 -
