- Place the filter inside the tank cover so that it is firmly attached. The filter should be left in
water.
- Put the lid closed. The filter will help remove lime in the water.
- Turn the tank cap firmly.
- Turn the water tank back to its correct position.
- Put the water tank back in the humidifier. - Never pour water into the steam outlet.
- Never shake the appliance.
The water tank is Nano-treated to prevent bacteria.
Always turn off the appliance before filling the tank with water.
Turn the humidifier on and
adjust the steam power setting.
1. It may take a few minutes before the steam is stable and gives the correct amount.
2. Do not direct the steam directly to walls or furniture. A high level of moisture can cause
damage. (The optimal humidity level for humans is between 45% and 55%).
3. If the humidifier does not emit steam:
3.1. Check if there is any water left in the tank. The humidifier is equipped with a water
sensor that stops it when it is out of water.
3.2. Check the steady state setting and that it is not a minimum.
CLEANING AND MAINTENANCE
This humidifier does not require much maintenance. The water must not be left in the tank
for long to prevent bacteria from building up. Before cleaning the humidifier, turn it off and
Mist nozzle
Water tank
Power On/Off &
Adjust mist level
Warm or Cold
mist – On/Off
