USER MANUAL: ARCTIV SERVER & NETWORK RACKS
4
© 2021 ArcTiv Technologies, LLC
ATSVR-NWR-MANUAL-01
SAFETY INSTRUCTIONS
•
Keep the Server Racks in a controlled indoor environment, away from moisture, temperature extremes,
flammable liquids and gasses, conductive contaminants, dust and direct sunlight.
•
Leave adequate space at the front and rear of the racks for proper ventilation. Do not block, cover or insert
objects into the external ventilation openings of the enclosure.
•
The Server and Network Racks are heavy, use caution when handling. Do not attempt to unpack, move or
install it unassisted. Use a mechanical device such as a forklift or pallet jack to move the system in the shipping
container.
•
Do not place any object on the enclosures, especially containers of liquid, and do not attempt to stack the
enclosures.
•
Inspect the shipping container and the enclosure for shipping damage. Do not use the system if it is damaged.
•
Leave the Server and Network Racks in the shipping container until it has been moved as close to the final
installation location as possible.
•
Install the enclosures and containment system in a structurally sound area capable of handling the load, or on
a level floor that is able to bear the weight of the enclosure, all equipment that will be installed in the
enclosure and any other enclosures and/or equipment that will be installed nearby.
•
Use caution when cutting packing materials. The enclosure could be scratched, causing damage not covered
by the warranty.
•
Save all packing materials for later use. Repacking and shipping the enclosures and containment system
without the original packing materials may cause product damage that will void the warranty.
•
Do not reship the enclosures and containment with additional equipment. The combined weight of the
enclosure and installed equipment must not exceed the load capacity of the pallet. ArcTiv Technologies is not
responsible for any damage that occurs during reshipment.
•
The enclosure casters are designed for minor position adjustments within the final installation area only. The
casters are not designed for moving the enclosure over longer distances.
•
When rolling the enclosure on its casters, always push it from behind; never pull it toward you.
•
A rolling enclosure can cause personal injury and property damage if not properly supervised. If rolling the
enclosure down a ramp is required, use extreme caution. Do not attempt to use ramps that have a slope
steeper than 1:12.
•
Use of this equipment in life support applications where failure of this equipment can reasonably be expected
to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not
recommended. Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen
or nitrous oxide.
