Arctiko LF 140, Руководство по эксплуатации

Страница: 11 / 20

11
Reversing the door
The door can be changed from righthand-hinged to lefthand-hinged, or vice versa.
To do so, proceed as follows:
Models with solid door:
1. Switch off the power at the mains socket.
2. Dismantle the two screws that hold the
control panel at front and back, pull the
panel a little forward, and then tilt it
upwards.
3. Dismantle the hinge at pos. A, and lift off the
door.
4. Dismantle the hinge at pos. B, and mount it
at pos. D.
5. Turn the door 180°, and fix it at the hinge
pos. D.
6. Mount the hinge from pos. A in pos. C, and
move bracket from pos. C to pos. A.
7. Fasten the control panel again. Apply power
to the cabinet again.
Models with glass door:
The door should only be reversed by a service electrician or an authorised refrigeration company with
knowledge of the products.
Cleaning
Before cleaning, switch off the cabinet at the mains.
The cabinet should be kept clean using a mild soap solution. Do not use cleaning detergents that may
cause scratches.
Regular cleaning of the rubber door gasket to ensure unwanted substances are removed which could
otherwise damage the gasket.
It is also good practice to regularly vacuum or brush clean the condenser on the back of the cabinet.