Arctiko CRYO 170, Руководство по эксплуатации, Страница: 9 / 40

8
Radiating is in the condenser of the machine room. As it radiates by absorbing
the air with an air-cooling fan, do not block the front of the ventilation gallery
and the rear of a main body with a wall etc.
A 2-pole connection is on the rear of the main body. From this connector,
you can connect a remote alarm system. The output is a Voltage free
connection.
There is a porthole at the center of the backside of the freezer, where you can insert
temperature sensors for measurements etc.
The inside diameter is ø20 mm, and the exterior opening is sealed with a
rubber plug.
To secure minimum space and necessary ventilation for the Compressor
room. Install this tool on the backside of the units, to keep distance to the
wall (approx. 25 cm).
To adjust the Feed, turn left to extend and turn right to contract. The
width of adjustment is approx. 15 mm. Upon installation, adjust the feed
for correct level and balance of the unit.
Stopper tool
Feed adjuster