Arctiko BBR100, Руководство по эксплуатации

Страница: 21 / 36

- After rewinding, lift the pointer (2).
- Unscrew the winding knob and the diagram´s locking knob (4).
- Take a blank diagram (8), note the date and identify the recording in the boxes foreseen so that
effect.
- Install the diagram on the axis and slip the edge of the disk under the 2 holding tabs.
- Screw back knob, clockwise, up to the stop and then come slightly backwards so as to be able to
make the diagram turn.
- Gently place the pointer back on the diagram.
- Position the diagram facing the fibre point, on the date and 4 hours in advance. The locking of knob
entails a slight slip (in the hour direction), for this reason one must anticipate this displacement so
as to obtain an accurate time setting.
- Tighten locking screw , without touching the diagram, up to positioning the diagram on the exact
time. The taking up of the angular play shall be carried out at the same time.
- Tighten the winding knob again.
2. Technical properties
Description Self contained temperature probe - recorder
Number of measurements channels 1
Measuring range 0-100°C and -10+40°C
Connection Capillary tube length: standard 3 m
Accuracy +- 2% of measuring range at 23°C
Full stroke 45 mm
Viewing Diagram disk Ø 125 mm
Length of recording (period) 1R / 7 days, 1 R /24 hours
Power supply, self contained Battery – LR 6 – 1.5V, 1 year (AA)
Appointed operating conditions -15°C + 60°C
Storage conditions -35°C + 65°C
Size 144 x 144 x 119 mm
Degree of protection IP 20
Accessories:
Diagrams
100 pcs.
Fibre point pen violet
Fibre point pen´s capacity About 90 m
21