Arctic ARL-155, Руководство пользователя

Страница: 7 / 20

Never clean the appliance with a
steam cleaner. Moisture could
accumulate in electrical components,
danger of electrical shock! Hot vapors
can lead to the damage of plastic
parts.
The appliance must be dry before it is
placed back into service.
Important! Ethereal oils and organic
solvents can attack plastic parts, e.g.
lemon juice or the juice form orange
peel, butyric acid, cleanser that
contain acetic acid. Do not allow such
substances to come into contact the
appliance parts.
Do not use any abrasive cleaners.
Cleaning
•Remove the food from the freezer.
Store them in a cool place, well
covered.
•Switch the appliance off and remove
the plug from the mains, or switch off
or turn out the circuit breaker of fuse.
•Clean the appliance and the interior
accessories with a cloth and lukewarm
water. After cleaning wipe with fresh
water and rub dry.
•Accumulation of dust at the
condenser increases energy
consumption. For this reason carefully
clean the condenser at the back of the
appliance once a year with a soft
brush or a vacuum cleaner (if the
condenser is at back of appliance.)
•After everything is dry place the
appliance back into service.
Defrosting the freezer
The freezer, however, will become
progressively covered with frost. This
should be removed.
Never use sharp metal tools to scrape
off frost from the evaporator as you
could damage it.
However, when the ice becomes very
thick on the inner liner, complete
defrosting should be carried out as
follows:
•Unplug the unit. Remove the drain
plug from the inside of the freezer.
Defrosting usually takes a few hours.
To defrost faster keep the freezer door
open.
•For draining, place a tray beneath the
outer drain plug. Pull out the drain dial.
•Rotate the drain dial 180 degree.
This will let the water flow out in the
tray. When done, push the drain dial
in. Re-plug the drain plug inside the
freezer compartment. Note: monitor
the container under the drain to avoid
overflow.
•Wipe the interior of the freezer and
replace the electrical plug in the
electrical outlet.
•Reset the temperature control to the
desired setting.
Service
Any electrical work required to do the
servicing of the appliance should be
carried out by a qualified electrician or
competent person. This product must
be serviced by an authorized Service
Center, and only genuine spare parts
must be used.
Troubleshooting
Caution! Before troubleshooting,
disconnect the power supply. Only a
qualified electrician or a competent
person must do the troubleshooting
that is not in this manual.
Important! There are some sounds
during normal use (compressor,
refrigerant circulation).
Problem Possible cause Solution
Appliance does
not work
Mains plug is not plugged in
or is loose
Insert mains plug
Fuse has blown or is defective Check fuse, replace if necessary
Socket is defective
Mains malfunctions are to be
corrected by an electrician
Appliance freezes
too much
Temperature is set too cold or
the appliance runs at MAX
setting
Turn the temperature regulator
to a warmer setting temporarily
The food is not Temperature is not properly Please look in the initial
7