Arctic ARK-185WNF, Руководство пользователя

Страница: 6 / 51

6
Space Requirement
• Select a location without
direct exposure to sunlight;
• Select a location with
enough space for the refrigerator
doors to open easily;
• Select a location with level
(or nearly level) flooring;
• Allow sufficient space to
install the refrigerator on a flat
surface;
• Allow clearance to the right,
left, back and top when installing.
This will help reduce power
consumption and keep your energy
bills lower.
• It is advisable to keep at
least 10mm gap at two sides.
Positioning
Install this appliance at a location
where the ambient temperature
corresponds to the climate class
indicated on the rating plate of the
appliance:
for refrigerating appliances with
climate class:
- extended temperate: this
refrigerating appliance is intended to
be used at ambient temperatures
ranging from 10 °C to 32 °C;
- temperate: this
refrigerating appliance is intended to
be used at ambient temperatures
ranging from 16 °C to 32 °C;
- subtropical: this
refrigerating appliance is intended to
be used at ambient temperatures
ranging from 16 °C to 38 °C;
- tropical: this refrigerating
appliance is intended to be used at
ambient temperatures ranging from
16 °C to 43 °C;
Location
The appliance should be installed
well away from sources of heat such
as radiators, boilers, direct sunlight
etc. Ensure that air can circulate
freely around the back of the
cabinet. To ensure best
performance, if the appliance is
positioned below an
overhanging wall unit, the minimum
distance between the top of the
cabi-net and the wall unit must be at
least 100 mm. Ideally, however, the
appliance should not be
positioned below overhanging wall
units. Accurate leveling is ensured
by one or more adjustable feet at
the base of the cabinet.
Warning! It must be possible to
disconnect the appliance from the
mains power supply; the plug must
therefore be easily accessible after
installation.
Electrical connection
Before plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your
domestic power supply. The
appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If
the domestic power supply socket is
not earthed, connect the appliance
to a separate earth in
compliance with current regulations,
consulting a qualified electrician.The
manufacturer declines all
responsibility if the above safety
precautions are not observed.This
appliance complies with the E.E.C.
Directives.
Door Reversibility
Before reversing the door, please be
prepared below tools and material:
straight screwdriver, cross
screwdriver, spanner and the
components included in the poly
bag.
Easy open handle ×1