Arctic King 817035, Руководство оператора

Страница: 21 / 38

3. Install the support brackets (with the sill angle
brackets attached) to the correct holes at the
bottom of the cabinet (see Fig. 16).
4. Tighten.
Extend the window filler panels
Install the window sash seal
and safety lock.
Installation Instructions
1
9
7
Attach the window filler
panels to the window frame
1. Extend the window filler panels out against the
window frame.
2. Use a 1/8" drill bit to drill a starter hole through the
hole in the top leg of each window filler panel and
into the window sash (see Fig. 18A and Fig. 18B).
Connect with one 3/ 4 (or 1/ 2") long hex head
screw.
Fig.18A
A.3/ 4 (or 1/2 ) long hex head screw
B. Left-hand window filler
panel top leg
C. Window channel
Fig.18B
A. 3/ 4
"
(or 1/2
"
)-long hex head screw
Fig.17A
3/ 4 (or 1/ 2 )-long
hex head screw
1/2
"
screws and
locknuts
1. Carefully raise the window to expose the filler panel
locking screws. Loosen the screws so the filler panels
slide easily.
2. Extend the panels to fill the window opening completely.
Tighten the locking screws on top (see Fig. 17).
3. Close the window behind the top angle.
Locking screw
7/16" locking screw
and washer
4. Attach the top angle to the window frame. Use a 3/32"
drill bit to drill one hole through the hole in the
middle of the top angle into the window frame, and
drive one 3/ 4 (or 1/ 2 ) HEX-HEAD locking screw
through the hole in the middle of the top angle into the
window frame (see Fig.17A).
1. Trim the sash seal to fit the window width. Insert
the sash seal between the upper and lower sashes
(see Fig. 18).
Window sash seal
2. Attach the right angle safety lock (see Fig. 19).
Weather seal