36
1. Loosen the jam nut (A).
2. Turn the throttle limiter screw
(B) clockwise to decrease
engine RPM maximum or
counterclockwise to increase
engine RPM maximum.
3. Tighten the jam nut (A)
securely.
Fuel Valve
The fuel valve is incorporated in the
gas tank. There are three positions:
ON, RES, and OFF.
In the OFF position, the valve will
not allow gasoline to flow to the car-
buretor. In the ON position (the nor-
mal operating position), gasoline will
flow from the tank to the carburetor.
In this position, 1.3 L (0.34 U.S. gal.) will remain in the tank as a reserve
quantity.
Moving the valve to the reserve (RES) position will allow the operator
to use the remaining gasoline in the tank. When turning the valve to any
of the three positions, be sure the indicator is pointed directly at the posi-
tion desired.
Shift Lever
1. To shift into forward gear, pull
out and upward on the shift
lever until the transmission
engages in the forward gear.
2. To shift into reverse gear, pull out
and push downward on the shift
lever until the transmission
engages the reverse gear. When in
reverse with the ignition switch in
the ON position, the reverse indi-
cator light will illuminate.
3. To shift into neutral from either
forward or reverse gear, push or
pull the lever to the center posi-
tion. When in neutral with the
ignition switch in the ON posi-
tion, the neutral indicator light
will illuminate.
! WARNING
Never leave the valve in the ON or RES position when the
engine is not running.
KM028A
KM043A
! WARNING
Always come to a complete
stop with the engine at idle
before moving the shift lever.
Changing gears while moving
or shifting from neutral with the
engine above idle could cause
sudden change of direction
resulting in loss of control or
being thrown from the ATV
causing severe injury or death.
KM914A
KM915A
KM915B
