3-36
MD1012
2. Using Crankcase Separator/Crankshaft Remover
and tapping lightly with a rubber mallet, separate
the crankcase halves. Account for two alignment
pins.
CC869
NOTE: To keep the shaft/gear assemblies intact
for identification, tap the shafts toward the
left-side crankcase half when separating the
halves.
MD1313
Disassembling
Crankcase Half
NOTE: To aid in installing, it is recommended that
the assemblies be kept together and in order.
NOTE: For steps 1-6, refer to illustration FI639A.
FI639A
1. Remove the secondary driven shaft assembly (A)
noting the location of the front and rear bearing
locating pins and the center bearing locating ring.
FI660A
FI659A
FI661A
2. Remove the reverse idler assembly (B). Account
for and note the location of the inner bushing (1),
idler shaft (2), and outer washer (3).
For Discount Arctic Cat Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com