Arctic Cat 300 Utility Скачать руководство пользователя | Manualshive

Страница: 75 / 84

background image

73

Arctic Cat ATV Emission Control Warranty

Statement

Warranty Rights and Obligations

Arctic Cat Inc. (hereinafter referred to as Arctic Cat) and the California Air Resources
Board are pleased to explain the emission control system warranty for each new Arctic
Cat ATV sold in the state of California. In California, a new ATV must be designed, built,
and equipped to meet the state’s stringent anti-smog standards.

Arctic Cat warrants the emission control system on the Arctic Cat ATV for the periods
listed below provided there has been no abuse, neglect, or improper maintenance of the
ATV.

The emission control system may include components such as the carburetor, ignition
system, and crankcase ventilation system. Also included may be hoses, belts, connectors,
and other emission-related assemblies.

When a warrantable condition exists, Arctic Cat will repair the ATV at no cost to the owner,
including diagnosis, parts, and labor.

Emission Control Warranty Coverage

A new Arctic Cat ATV manufactured after January 1, 1997 has a two (2) year warranty on
its emissions control components.

If an emission-related component on the ATV is defective, the component will be repaired
or replaced by any authorized Arctic Cat ATV dealer.

Owner’s Emission Control Warranty Responsibilities

It is the owner’s responsibility to perform the required maintenance listed in the Operator’s
Manual. Arctic Cat recommends the retention of all receipts covering maintenance per-
formed on the ATV, but Arctic Cat cannot deny warranty solely for the lack of receipts or for
failure to ensure the performance of all scheduled maintenance on the emission control
system.

It is the owner’s responsibility to present the ATV to an authorized Arctic Cat ATV dealer
as soon as a problem exists. The undisputed warranty repairs should be completed within
a reasonable period of time, not to exceed thirty days.

The ATV owner should be aware that Arctic Cat may deny warranty coverage if either the
ATV or a component has failed due to abuse, neglect, improper maintenance, or any
unapproved modifications.

If you have any questions regarding your warranty rights and responsibilities, contact
either Arctic Cat Inc, P.O. Box 810, Thief River Falls, MN 56701, (218) 681-4999 or the
California Air Resources Board, 9528 Telstar Avenue, El Monte, CA 91731, (818) 575-
6800.

«
...
73
74
75
76
77
...
»

Содержание 300 Utility





















































































Отзывы:

Нет отзывов

Похожие инструкции для 300 Utility

Sportsman 9921792

Бренд: Polaris Страницы: 131

Бренд: Yamaha Страницы: 92

Бренд: Yamaha Страницы: 93

Бренд: Yamaha Страницы: 99

Бренд: Yamaha Страницы: 98

Бренд: Yamaha Страницы: 114

Бренд: Yamaha Страницы: 112

Kodiak YFM400FWK

Бренд: Yamaha Страницы: 167

Бренд: Yamaha Страницы: 193

Kodiak YFM45FAV

Бренд: Yamaha Страницы: 194

KODIAK 700 YFM70KDXH

Бренд: Yamaha Страницы: 178

KODIAK 700 YFM70KDHG

Бренд: Yamaha Страницы: 180

KODIAK Ultramatic

Бренд: Yamaha Страницы: 185

KODIAK 4X4 Ultramatic

Бренд: Yamaha Страницы: 185

KODIAK 450 Ultramatic

Бренд: Yamaha Страницы: 189

GRIZZLY YFM70GPAH

Бренд: Yamaha Страницы: 174

Бренд: Yamaha Страницы: 190

KODIAK 400 Ultramatic 4x4

Бренд: Yamaha Страницы: 187

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды