30
NOTE: To select the odometer
(ODO), trip #1 (T1), or trip #2 (T2),
press the Mode Button (3) to select
the distance mode; then press the
Set/Reset Button (4) to select the
desired display. Hold the Set/Reset
button down to reset trip meters.
6. Gear Position Indicator - Indicates
which gear is selected.
7. Speed/Tach Indicator - Indicates
approximate vehicle speed in mph or
k/ph when speedometer function is
selected or rpm when tachometer
function is selected.
8. Speed Function Display - Displays
which speed function (MPH, TACH,
K/PH) is being indicated by the
Speed/Tach indicator.
NOTE: The speed and tach func-
tions may be switched by pressing
the Set/Reset Button.
9. Differential Lock Indicator - Displays
LOCK when the differential lock has
been engaged.
10. Drive Select Indicator - Displays
4WD when selected by the drive
select switch or when the differential
lock is engaged.
11. High Beam Indicator - The High
Beam icon will appear only when the
lights are on high beam.
12. EFI Malfunction Indicator - The
speedometer/tachometer needle will
sweep full scale and the LCD will go
blank except a malfunction code and
wrench icon will be displayed on the
LCD whenever an electronic fuel
injection malfunction code is
detected. After 30 seconds, the LCD
and speedometer/tachometer will
return to normal, but the malfunc-
tion code and wrench icon will con-
tinue to be displayed on the LCD
until the malfunction is corrected.
NOTE: Take the vehicle to an
authorized Arctic Cat dealer to have
the error corrected and the system
error reset as soon as possible.
FI001B
Battery Condition Indicator - The word
VOLT will flash on the LCD whenever a
low voltage (<9 DC volts) or high volt-
age (>16 DC volts) is detected.
Temperature Indicator - The high temper-
ature icon will flash and the speed/tach
needle will sweep full scale if the engine
overheats. After 30 seconds, the speed/
tach needle will return to normal, but the
temperature icon will continue to flash.
The icon should not be visible during
normal operation.
NOTE: High engine RPM, low vehi-
cle speed, or heavy load can raise
engine temperature. Decreasing
engine RPM, reducing load, and
selecting an appropriate transmis-
sion gear can lower the temperature.
NOTE: Debris in the engine com-
partment (or packed between the
cooling fins of the radiator) can
reduce cooling capacity. Using a
garden hose, wash the radiator and
the engine to remove any debris
preventing air flow.
CAUTION
Continued operation with high engine
temperature may result in engine
damage or premature wear.
CAUTION
Arctic Cat does not recommend
using a pressure washer to clean the
radiator core. The pressure may bend
or flatten the fins causing restricted
air flow, and electrical components
on the radiator could be damaged.
Use only a garden hose with spray
nozzle at normal tap pressure.
Содержание 2012 Prowler XT
Страница 55: ...53 NOTES ...
Страница 61: ...59 Maintenance Record DATE MILEAGE SERVICE PERFORMED NOTES ...
Страница 62: ...60 NOTES ...