Arctic Aire DPA80C1WA, Руководство по эксплуатации и уходу владельца

Страница: 6 / 38

Operating Instructions
OPERATING METHODS Applying the range for COOLING and DRYING.
The temperature range for this unit is from 16°C - 35°C (60.8°F - 95°F) for
cooling and ranges from 16°C - 35°C (60.8°F - 95°F) for dehumidifying.
Location
Place the unit on a horizontal floor when using, and maintain a distance of
50cm from the walls, surfaces, flammable objects or other obstructions.
Power (Check before connecting the power)
The normal running fluctuation range of voltage for this unit is ±10 value
listed on the nameplate. Too high or too low of voltage will influence the
unit. It is better to adopt a power lead and pickup current above 10A to
prevent sudden drop of voltage when the unit is running. It is necessary to
exchange a broken power cord for a special quality power cord.
When it is time to change the power cord or repaire it, please
contact the seller and have them repair it by a professional personnel.
Grounding must be conducted and the unit should be connected to special
grounding equipment in the building to ensure it’s well grounded.
7
Receiver Window
MODE Button
Temperature Selection
Buttons
ON/OFF Button
FAN Mode Light
DRY Mode
Light
LED screen
COOL Mode
Light
WATER FULL
Light
CONTROL
PANEL
When pressing a valid key/button a beep will sound to
indicate a button was pressed and a light will turn on
for that particular button.
1. ON/OFF
Turn on or turn off the unit (press once to turn on unit
and repress to turn off).
2. "+","-" key
In COOL mode, press "-" once, the set temperature will
decrease by 1 (1°C), press "+" once, the set
temperature will incresae by 1 (1°C). The set
temperature can be selected from 16°C -30°C
(61°F -86°F ).
3. MODE
While the unit is operating, press the key to enter the
mode menu. FAN, COOL or DEHUME mode.
4. Fan speed
When working in FAN or COOL mode, the air
conditioner can select 3 speeds. The initial speed is
high when running in DRY the initial speed is low
when running FAN mode.
Dry Mode
When the unit is operating in the dry mode, it decreases
the humidityof the room.
Cool Mode
When the unit is operating in the cool mode, it
decreases the temperature of the room.
Water Full
When the button is blinking the water in the tank is full,
proceed to drain out the water.
5.
6.
7.