Arcteq AQ 102, Инструкция по эксплуатации

Страница: 19 / 46

Figure. 4.4 - 8. DIP switch diagram.
Table. 4.4 - 4. DIP switch settings.
PPin number in number
((name name))
FFunction selection unction selection ON (le ON (left position) ft position) OFF ( OFF (rig right position) ht position)
8
(L> or or L> + I>)
The tripping criterion for the S2,
S3, S4 (sensor) and S5 (fiber)
channels.
Tripping on light only (L>).
Tripping on light and overcurrent
(L> + I>), both of which are
required to occur simultaneously
to trigger tripping.
7
(S1: L> or or L> +
I>)
The tripping criterion for the S1
sensor channel.
Tripping on light only (L>).
Tripping on light and overcurrent
(L> + I>), both of which are
required to occur simultaneously
to trigger tripping.
6
(Latch or or Non-
latch)
Latching or non-latching for the
T1 and T2 trip relays.
T1 and T2 operate as latched.
T1 and T2 operate as non-
latched.
5
(100 ms or or 150
ms)
The setting for the CBFP time. The CBFP time is set to 100 ms. The CBFP time is set to 150 ms.
4
(scheme select)
Scheme selection.
Please refer to the "Scheme
selection" and "Application
examples" chapters.
Please refer to the "Scheme
selection" and "Application
examples" chapters.
3
(scheme select)
Scheme selection.
Please refer to the "Scheme
selection" and "Application
examples" chapters.
Please refer to the "Scheme
selection" and "Application
examples" chapters.
2
(scheme select)
Scheme selection.
Please refer to the "Scheme
selection" and "Application
examples" chapters.
Please refer to the "Scheme
selection" and "Application
examples" chapters.
1
(scheme select)
Scheme selection.
Please refer to the "Scheme
selection" and "Application
examples" chapters.
Please refer to the "Scheme
selection" and "Application
examples" chapters.
A AQ Q-101 (A -101 (AQ Q-101D -101D))
Instruction manual
Version: 2.01
© Arcteq Relays Ltd
IM00006 17