Section 3
Handling
Before switch on the vacuum cleaner:
Please make sure that the paper bag is correctly
inserted in the housing inlet. Do not use the vacuum
cleaner if no dust bag is inserted.
Insert the suction hose into the connection opening and
turn it slightly to the right or to the left to lock.
Insert metal pipes into each other and put them
together with the handle of the hose. Place the
necessary nozzle on the lower end of the suction pipe.
Plug the power plug into the socket
.
Press the switch button to switch on the device.
After vacuum
Once cleaning is complete, turn off the power. To switch
off, tap on switch button. Disconnect the power plug from
the socket.
Wrap the cable around the case and push the connector
into the clip on the cable.
Replacing the dust bag
Turn off the vacuum cleaner and pull out the plug
.
Remove the suction hose from the device
.
Unlock the dust bag chamber with the cover lever,
remove the cover.
Grasp the dust bag on the cardboard reinforcement
and carefully pull it out.
Insert a new dust bag into the dust bag chamber. The
cardboard reinforement of the bag must be inserted
into the guide below the opening for the suction
hose.
Close the lid again, check before commissioning
whether all components are properly installed.
