6
BTT25 BobTail® Hydraulic Installation Tool (HK1098)
1. Push the tool’s nose over the end of the fastener until it
bottoms out.
2. Press and hold the trigger until the collar is swaged and
the tool’s Anvil is ejected off the collar and the tool is
released from the fastener.
Operating Instructions
Specifications
10.4
(
26.5
)
5.2
(
13.3
)
2.0
(
5.1
)
2.4
(
6.3
)
f
igure
1
Model BTT25
OPERATING TEMPERATURE RANGE:
32–125° F (
0–51.7° C
)
STROKE
: 1.63 in. (
4.1 cm
)
WEIGHT
: 8 lbs. (
3.62 kg
)
INCHES
(cm)
WARNINGS:
- To avoid pinch point, never place hand
between nose assembly and work piece.
- Only use compatible equipment with this
tool.
Service Kit
- BTT25KIT
Teflon Stick
- 503237
Loctite
®
242
- 505016
Anti-seize Lubricant
- 508183
CE Compatible
Pump/Controller
- HK432BT
Hose Cable
Extension Assembly
- 128461-(length)
Test Plates:
12mm Small
-
128484
12mm Large
-
128483
14mm Small
-
128467
14mm Large
-
128466
16mm Small
-
128465
16mm Large
-
128464
20mm Small
-
128486
20mm Large
-
128485
Load Cell Assembly - 128433
(
shown below
)
Loctite
is a registered trademark of Henkel Corporation, U.S.A.
TEFLON
is a registered trademark of E. I. du Pont de Nemours and
Company.
To maintain CE conformity, only CE compatible equipment should be used with these tools. Installation tools
and nose assemblies are the only CE components, unless otherwise noted. Controls and other hardware
shown in the manual are for domestic use only.
Optional Equipment
