10
202 series Pneudraulic Installation Tools
(HK938)
Disassembly
(continued)
PINTAIL BOTTLE/VACUUM SYSTEM DISASSEMBLY
This procedure is applicable to models
202V
and
202LV
only; it should be used in conjunction with the previous
sections,
g
enerAl
and
h
eAD
/h
AnDle
. For component
identification, see Figures 5, 6, &
15.
1. Reach through the window of pintail bottle and
remove retaining ring and washer. (Figure 5)
2. Remove pintail bottle
, and then disconnect the tube
from Plug & Gasket Assembly. (Figure 15)
3. Remove adapter and
Tubing and Slide Assembly
.
4. Remove end cap and spring. (Figure 6)
5. Remove
spacer and O-ring from the
spring side of
the end cap.
6. Remove retaining ring, tube, wiper seal, washer, and
O-ring from the
bottle
side of the end cap.
7. Remove O-ring
s from inside the adapter and
Tubing
and Slide Assembly
. (Figure 15)
501007
Retaining Ring
and
506648
Washer
123577
End Cap
128044
Tubing & Slide Assembly
123784
Adapter
130692
Pintail Bottle
F
Igure
5
500778
O-ring
506492
Spring
124828
Washer
125577
End Cap
500807
O-ring
506648
Washer
506488
Wiper
Seal
502310
Retaining
Ring
128186
Tube
F
Igure
6
