4
2013 & 2014 series Pneudraulic Installation Tools
(HK978)
Description
The
2013
series and
2014
model are lightweight, high-
speed production tools that install:
-04 through -06 diameter HUCK-CLINCH
®
fasteners,
and oversize HUCK-CLINCH fasteners
-04 through -05 diameter Huck UNIMATIC
®
blind
rivets
Any other blind fasteners that have a pinbreak of
2650 lbs or less.
The
2013V
model has a Slide & Tubing Assembly, which
is
a ribbed “ON/OFF” vacuum-regulating slider
that
enhances the tool capabilities by expelling broken pintails
into the pintail collector, and holding fasteners firmly in
the nose assembly with the tool in any position.
When the tool is not in use, the OFF position (slider
forward) will prevent air loss. See Figure 12 for the
location of this assembly (pictured in the ON position) on
the tool.
The pulling action of the pull piston is provided by a
pneumatic-hydraulic (pneudraulic) intensifier system that
is powered by air pressure. The air inlet is equipped with
a connector with
1/4”-18 female pipe threads to accept
your air hose or quick-connect fitting. The piston return
stroke is spring actuated.
Specifications
STROKE:
0.650
in (
1.65 cm
)
WEIGHT:
2013
&
2014
: 4.4 lbs (
1.99 kg
)
2013B
&
2013V
: 4.7 lbs (
2.13 kg
)
MAX AIR PRESSURE:
90 psi (
6.2 bar
)
MAX FLOW RATE:
2.9 scfm
(
170 l/min
)
POWER SOURCE:
90 psi (
6.2 bar
) maximum shop air
MAX OPERATING TEMP:
125° F (
51.7° C
)
PULL CAPACITY:
2670 lbs @ 90 psi
(
11.88 kN @ 6.2 bar
)
SPEED / CYCLES:
20 per minute
HOSE KITS:
Use only genuine Huck Hose Kits rated @
10,000 psi (
689.5 bar
) working pressure.
HYDRAULIC FLUID:
Hydraulic fluid shall meet DEXRON
®
III, DEXRON VI, MERCON
®
, Allison C-4 or equivalent
Automatic Transmission Fluid (
ATF
) specifications. Fire-
resistant fluid may be used if it is an ester-based fluid
such as Quintolubric
®
HFD or equivalent. Water-based
fluid shall NOT be used as serious damage to equipment
will occur.
Where the following trade names are used in this manual, please note:
DEXRON
is a registered trademark of General Motors Corporation.
Loctite
is a registered trademark of Henkel Corporation, U.S.A.
LUBRIPLATE
is a registered trademark of Fiske Brothers Refining Co.
MERCON
is a registered trademark of Ford Motor Corp.
Never-Seez
is a registered trademark of Bostik, Inc.
Quintolubric
is a registered trademark of Quaker Chemical Corp.
Slic-tite
is a registered trademark of LA-CO Industries, Inc.
Spirolox
is a registered trademark of Smalley Steel Ring Company
Teflon
is a registered trademark of E. I. du Pont de Nemours and Company.
Threadmate
is a registered trademark of Parker Intangibles LLC.
TRUARC
is a trademark of TRUARC Co. LLC.
Vibra-Tite
is a registered trademark of ND Industries, Inc. USA.
