Arcon 10310, Руководство по эксплуатации

Страница: 15 / 36

15
3.8 Pin configuration for the MIGweld 300MS power source:
A 24VAC* 5A Supply
B 24VAC* Remote Contactor
C +15V DC to Remote Current Control
D Remote Current Common (PCB Ground)
E Remote Current Level
F Current Feedback, 1V DC per 100A output
G 24VAC / 115VAC Common
H Voltage Feedback, 1V DC per 10V output
I 115VAC 5A Supply
J 115VAC Remote Contactor
K Ground (Earth)
L Contactor Remote Enable
M
N Contactor Remote On (Take to 0)
* Note: A 42V AC Supply may optionally replace the 24V AC Supply. This is an option
from the manufacturer and can also be converted by a qualified repair technician.
3.9 Front Panel mounted Digital Meter
The Digital Meter provides real-time Voltage and Current (switchable) output readings.
The front panel meter can be switched into two modes by pressing the black mode button:
1. Output Voltage of the welder in real-time.
2. Output Current of the welder.
During welding, the meter shows the current that is being delivered.
When welding stops, the meter will show the last Current that was delivered for a
period of 3 seconds, and then revert back to real time.