Page 14
Task 3: Configuring the SBC-MediaGX board for
TCP/IP
Exit Voyager and Photon (See steps 2 and 3 of Task 2 above)
Enter the IP address - The 'X' is the number of logical QNX LANs
running the hardware protocol
ifconfig enX ip_address
Enter the netmask - The 'X' is the number of logical QNX LANs running
the hardware protocol
ifconfig enX netmask net_mask
Enter the default gateway address
route add default gateway_address
You may now use the TCP/IP services listed in the '/usr/ucb' directory.
If you'd like to use the Voyager Web Browser type
ph
Note:
Your system administrator will be able to tell you which IP address,
netmask, and gateway address you can use. Please consult this person
before proceeding. You may also edit the /etc/netstart file to configure
TCP/IP during the boot process.
1.
2.
3.
4.
5.
You
have
now
completed
Task
3.
