ArchWork ARCWAVE12RGB, Руководство пользователя

Страница: 20 / 28

ARCWAVE12RGB
6
Fig.2
- 2 - INSTALLATION
2.1 MOUNTING
ARCWAVE12RGB may be set up on a solid and even surface. The unit can also be mounted upside down to
a cross arm. For fixing, stable mounting clips are required. The mounting place must be of sufficient stabil-
ity and be able to support a weight of 10 times of the unit’s weight.
When carrying out any installation, always comply scrupulously with all the regulations (particularly re-
garding safety) currently in force in the country in which the fixture’s being used.
• Install the projector at a suitable location by means of the mounting bracket using 3xM6 screws (fig.2).
• To adjust the direction of the fixture use a M8 hex key to loosen the hex bolt, adjust the direction of the
fixture, and then tighten the hex key (fig.3).