ArchWork ARCPAR18, Руководство пользователя

Страница: 32 / 40

ARCPAR18
14
3.14 FIXTURE SETTINGS
It is possible to change the parameter value in the following way:
Dimmer
• Enter in Dimmer mode to select specific dimming curve, press the button MODE so many times
until shows dIM , and press the button ENTER to confirm.
• Press the button UP/DOWN to select Off - dIM1 - dIM2 - dIM3.
• Press ENTER button to store.
• Press the MODE button to go back or to meet the waiting time to exit the setup menu.
Temp
Show the temperature unit.
• Press the button MODE so many times until shows teMP.
3.15 ACTIVATE THE PASSWORD
Enter the KEY mode to select whether the access password is on or off.
• Press the button MODE so many times until show PASS and press the button ENTER to confirm.
• Select
On
or
OFF
.
When the fixture is set as pass On , after 30 seconds or turn on the fixture next time, the fixture will need an
access password to enter the display menu control.
NOTE - The factory access password is UP + DOWN + UP + DOWN. Press ENTER to confirm the access.