ArchWork ARCGROUND36RGB, Руководство пользователя

Страница: 31 / 36

13
ARCGROUND36RGB
3.8 Basic instructions for DMX operation ARCFULL
MASTER DIMMER
• CH1 controls the intensity of the currently projected color.
• When the slider is at the highest position (255) the intensity of the output is the maximum.
RED, GREEN AND BLUE COLOR SELECTION
• CH2, CH3 and CH4, control the intensity ratio of each of the red, green, blue.
• When the slider is at the highest position (255) the intensity of the color is the maximum.
• CH2, CH3 and CH4 can be combined together to create over 16 million colors.
COLOR MACROS AND WHITE BALANCE
• CH5 selects the required COLOR MACRO and whites in different color temp.
• CH5 has priority over CH2, CH3 and CH4.
• CH1 is used to control the intensity of the COLOR MACRO.
STROBE
• CH6 controls the strobe of CH1 to CH5.
DIMMER SPEED
• CH7 is used to select the kind of dimmers curve required.
3.9 Special functions
• Press the button MENU and select through the directional buttons the [ SETTINGS ] mode; and press the
button ENTER to confirm.
It is possible to view to following functions:
COLOR
• [ COLOR ] is for activate/deactivate the color calibration functions.
• When [ RGB ] is selected, on RGB =255, 255, 255 the color is displayed as calibrated in CAL2 (RGB).
• When [ COLOR ] is set [ OFF ], on RGB =255, 255, 255 the RGB values are not adjusted and the output is
most powerful.
• When [ UC ] is selected, the RGB output adjusted to a standard preset universal color which balances
fixtures from different generations.
RESET
• In order to reset custom modesto default values select [
RESET
].
3.10 Dimmer
• Enter [ Dim ] to select dimmer mode and dimmer speed. When dimmer is set to [ OFF ], the RGB and MASTER
DIMMER are linear. The Dim1/2/3/4 are speed modes of the non linear dimmer, [
Dim1
] is the faster, while
[ Dim4 ] is the slowest.
Note. The factory default setting is [ Dim4 ].