Archtek 5634PCV, Руководство пользователя

Страница: 18 / 38

18
&Rn Clear To Send Signal Select
&R0 Modem turns on the Clear To Send signal when it detects the Request
To Send (RTS) signal.
&R1* Modem turns on Clear To Send signal.
Result Codes:
OK n = 0, 1
ERROR Otherwise
&Sn Data Set Ready (DSR) Option
This command selects DSR action.
&S0* DSR always ON.
&S1 DSR comes on when establishing a connection and goes off when the
connection ends.
Result Codes:
OK n = 0, 1
ERROR Otherwise
&Un Protocol Selection
&U0 Select V.PCM
&U1 Select V.34Bis/V.34
&U2 Select V.32Bis/V.22Bis
&U3 Select Bell 103 300bps
&U4 Select V21 300bps
&U5 Select V23
&V View Active Configuration and Stored Profile
This command is used to display the active profiles.
&Wn Store Current Configuration
This command stores certain command options and S-register values into the
modem nonvolatile memory. The ATZ command or a power up reset of the
modem restores this profile.
&W0* Stores active configuration profile in configuration profit 0.
&W1 Stores active configuration profile in configuration profit 1.
Result Codes:
OK n = 0
ERROR Otherwise